AIRPODS CONNECTED BUT NO SOUND? TOP WAYS TO FIX
Although it may take some time to resolve the AirPods connection issue, resting the AirPods, re-enabling detection, resetting network settings, and updating the device can all help to resolve the AirPods connected but no sound issue. Make sure your AirPods are clean, though, because they might gather up dust and tiny particles, which can harm your iPhone. The battery in the AirPods is excellent, but you should check it before proceeding with our procedures. You can resolve this problem by following these steps.
Clean your AirPods
When was the last time you cleaned your Airpods properly? By correctly, I don’t mean wiping your AirPods down with a T-shirt or any other cloth at hand. To avoid damaging your Airpods, you must clean them carefully. Apple teaches how to clean your cherished Airpods properly.
Xbox Won’t Turn On- Things To Do
Activate your Bluetooth Device
Even if it’s clear, it’s still worth checking. First, go to your Bluetooth settings. Toggle the Bluetooth on/off switch. If Bluetooth is already turned on, turn it off for 5-10 seconds before turning it back on.
Ensure that your Airpods are Fully Charged.
You can’t expect sound if there isn’t any electricity, can you? Simply place them in the case for a few hours to charge them.
Worst Refrigerator Brands To Avoid + [Most Reliable Refrigerator Brands]
Reset your AirPods
It’s possible that resetting the AirPods will fix the issue. With this, some people were able to remedy the issue. Follow the steps below to reset your AirPods.
- Place your AirPods in the charging case that came with them. Now Close the lid and leave it closed for 30 seconds before opening it.
- Go to Settings on your iPod touch, iPhone, iPad, or another iOS device. Select Bluetooth and tap “I” next to the name of your AirPods. Now set aside this device and push the button once again to confirm.
- Get your AirPods ready. Make sure the lid is open, then press and hold the buttons on the backside of the charging case for 15 seconds. Wait for a flashing white light to appear; if you see an amber light, you’re done.
- Connect your AirPods to your iPhone, iPad, or iPod at this point. By placing AirPods near your device, you can connect it. If the audio does not appear after completing this step, proceed to the next step below.
How To Unlock Honeywell Thermostat (Full Proof Guide)
Disable/Enable Automatic Detection
Apple appears to have difficulty with auto-detection on occasion. For example, I experienced an issue with my new Apple Watch not receiving notifications, which I was able to resolve by disabling wrist detection. On your iPad or iPhone, you can disable the Automatic Ear Detection feature. Now hit on Turn it On to see if the problem still exists. This step will lead you to this selection.
Settings > Bluetooth > AirPods > Disable Automatic Ear Detection.
Remove the Music Volume Limit and Audio Balance
When you accidentally turn on the AirPods pro volume control limit on your iPhone or iPad, you may encounter these issues. If AirPods are connected but not playing audio, disengage to ensure the level of the AirPods is not too low to be heard. The Music app on iOS devices has a setting that allows you to change the volume limit. The volume limit is turned off by default by the company. So, if you accidentally turned it on, double-check it.
- On the iPhone, go to Settings > Accessibility > Audio/Visual > Balance on the left or right side. [Keep the Slide position in the middle to ensure that both the left and right AirPods receive equal sound]
- Turn off the volume in Settings > Music.
Update your device
Some users also advocate this because, due to the Apple release, if your smartphone is running on an older version of the iOS operating system, it may have bugs. When Apple announces new AirPods updates, they are usually automatically updated when the attached iPhone or iPad is connected to Wi-Fi. So now you must look for updates on your iPhone or iPad, and if any outstanding updates are available, make sure to install them.
Software Update can be found under Settings > General.
What to do when crackstreams shut down?
Reset Network Configuration
If none of the above techniques to repair AirPod sound are working for you, it’s possible that you’re having connectivity troubles, which you may resolve by resetting your network settings.
All Bluetooth devices, WI-FI networks, and call settings will be erased if you try to reset network settings. However, if the AirPods’ network troubles are resolved, you’ll be able to listen to your AirPods’ sounds once more. To Reset Network Settings, follow these steps:
Reset Network Only in Settings > General
When you’ve completed a complete reboot, you’ll be able to pair Bluetooth with your iOS devices. If it was a problem with the network settings, it had previously been resolved.
How to Solve [pii_email_09561ce25d5bd38c7da2] Error?
Still not working? Get in touch with Apple Support.
After all above steps if still Airpods Connected But No Sound? Then, If none of the previous troubleshooting steps work, you may be dealing with a major software or hardware issue. For example, if you can connect another external speaker or earbud pair to your iPhone without issue, the issue is most likely with your AirPods.
Your nearest Apple store will examine the situation for free. Your warranty will determine whether or not you can get this fixed for free.
Twitch TV Activation – Detailed Guide + Instructions